Spin Flash Drying Equipment for powdery materials

• After-sales Service: 1 year
• Warranty: 1 year
• Movement Way: Combined
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: XSG
• Heating Mode: Transmission
• Drying Medium: Effluent Gases
• Operation Pressure: Atmospheric Dryer
• Type: Flash Drying Equipment
• Place of Origin: Jiangsu, China (Mainland)
• Model Number: XSG
• Spin Flash Drying Equipment: Flash Drying
• Brand Name: FUYI
• Structure: Combined Drier
• Operational Method: Continuous
• Appearance of Dried Sample: Bulk
• Type of Flow: Cross Flow
• Type of Atomization: Pressure Atomization
• Transport Package: Wooden Case
• Specification: CE
• Trademark: FUYI
• Origin: Jiangsu Changzhou
• HS Code: 8419399090
• Production Capacity: 50units/Year
• Package Size: 360.00cm * 280.00cm * 320.00cm
• Package Gross Weight: 21000.000kg

Product Description

Spin Flash Drying Equipment

Specifications
 
Spin Flash Drying Equipment: 
1)5-10s drying time 
2)heat source:steam exchange, fuel gas,oil or coal,etc. 
3)negative operation 


 
Spin Flash Drying Equipment:
Drying sticky materials 
The cone structure in the dryer, washing out of the air flow to the wall and the structure of the agitator determines it can deal with certain sticky materials. 
Drying thermo-sensitive materials 
As the drying time is short, the relative speed between the materials and the hot air is big, and the hottest air does not contact the dried materials directly, it is suitable to treat the thermo-sensitive materials. 
The drying intensity is high. 
As the materials are smashed, washed out and impacted, its surface area increases and the drying is strengthened; At the same time, as the hottest air does not contact the dried material directly, the entering air temperature can be made higher than the melting point of the materials, therefore, the drying intensity of the equipment is high
Efficiently control the final moisture and fineness 
The final moisture and the fineness of the finished product is effectively controlled by the internal devices equipped in the drying tower (swirl-flow flake, elutriate ring or grader) , and the coordination with the temperatures of the entering and discharging air. 
Environment meets the standards.
The system eliminates the operation environment pollution under the negative pressure in the operation and it adopts different dust removing mode and materials according to the different raw materials (pulse bag dust catcher, water shower duster, Venturi damp dust remover and so on). 
Low labor intensity 
The feeder and the discharger are made in different forms according to the difference of the materials so as to reach automatically continuously feeding and discharging aims. 
The best power matching 
The blower, the draught fan, the agitator and the feeder and so on are furnished with the best power according to the different nature of the materials (density, bulk density, viscosity, fineness, primary moisture, final moisture, angle of repose and so on).



Technical parameters

Type	Inner diam. ofthe main machine(mm)	Air quantity m3/h	Moisture evaporation  kg/h	Installed capacity kw	Max. height  m	Floor area  m2
XSG-2	200	350-500	12-17	6-10	3.5	10
XSG-4	400	1150-2000	40-70	12-18	4.2	18
XSG-6	600	2450-4500	80-150	20-25	5.2	25
XSG-8	800	4500-7550	150-250	27-32	5.6	32
XSG-10	1000	7000-12500	230-420	40-47	6.2	38
XSG-12	1200	10000-18000	300-600	50-65	7.0	45
XSG-14	1400	13500-23500	450-750	60-72	7.4	55
XSG-16	1600	18000-32000	600-1200	70-90	8.0	75

Notice
1.)Moisture evaporation volume is the maximum moisture evaporation volume measured when the entering air temperature is 180 and discharging air temperature is 80;
2.)The max height and floor coverage will be laid according to the actual conditions, the data in the table is only for reference.